PairDrop Installation via Proxmox VE Helper-Scripts
This guide covers how to install PairDrop—a self-hosted, local file transfer solution—in an LXC container on Proxmox VE using the Proxmox VE Helper-Scripts. These community scripts make deploying new apps, like PairDrop, fast, standardized, and repeatable.
For official script documentation, visit: PairDrop Helper Script
Step-by-Step Instructions
1. Launch the Installation Script
Open the Proxmox VE Shell on your chosen node and run:
bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/ct/pairdrop.sh)"
2. Follow the Installation Prompts
The script will guide you through several basic setup options. Common prompts include:
| Prompt | Example / Recommendation |
|---|---|
| Container ID | 100 (or any unused ID) |
| Hostname | pairdrop |
| Network Bridge | vmbr0 (default, usually fine) |
| Static IP Address | e.g., 172.30.0.x |
| Gateway IP | e.g., 172.30.0.1 |
| Storage Location | e.g., local-lvm |
| Root Password | Set a secure password |
| Enable SSH/Nesting | Optional |
Adjust these as needed for your lab's environment and network.
3. Wait for Setup to Complete
- After you confirm your settings, the script will:
- Download the latest Debian 12 template
- Create an LXC container
- Install Docker inside the container
- Deploy the PairDrop Docker image This process is automated—wait for it to finish and note any output or log locations for future reference.
4. Access the PairDrop Web Interface
After installation is complete, open your browser and go to:
Replace
with the IP you assigned in setup. You will now be able to use the PairDrop web UI.
Additional Notes
- You can review or update your container’s configuration from the Proxmox web UI.
- For container management and updates, check the official helper scripts and project repository.
- PairDrop works cross-browser and is accessible on your LAN unless you configure additional network access.
References: